snom ONE and Patton Smartnode 4552 ISDN Configuration Example #snom #patton

Thanks @positive from the snom ONE forums for sharing your Patton Smartnode 4552 ISDN config with us.
Patton Smartnode 4552 ISDN Configuration Example:
Click Here

Using the Patton Smartnode 4960 With snom ONE and Comcast PRI (USA)

We just implemented a Patton Smartnode 4960 on an exsisting snomONE PBX implementation. The installation went quite smoothly (with just a little help from Patton's execellent support). We thought we would share the SN4960 configuration so anyone else doing it could move ahead even faster.

Download it here:



Here is how the trunk is setup in snom ONE pbx:

You may also want to see Patton Config Tool:
http://windowspbx.blogspot.com/2010/12/patton-provides-free-pstn-gateway.html

Most Recommended PSTN Gateway Report:
http://windowspbx.blogspot.com/2010/02/most-recommend-pstn-gateway-patton-411x.html

#Patton Really Wants To Get Their Gateway Into Your Microsoft UC Implementation #lync

Patton wants to provide gateways into OCS/Lync implementations. And with their stellar support which continues to amaze me on the PBX side of things I think they have a good shot. Here they have provided a lync...oops...link to how to configure your Patton 46xx series for use with OCS:
http://www.patton.com/voip/appnotes/AppNote%20-%20OCS_to_SN4600_BRI.pdf

Patton Releases An Updated Version of Their PBX Gateway Configurator Tool

I didn't get a chance to look what is upgraded (too busy looking at snom m9 ;-) so have at it! Hey, comment if you note good updates.

Here it is:
http://upgrades.patton.com/list.asp?model=SmartNode%20Utilities&flag=1

Patton Smartnode 4300 FXS Channel Bank Quick Review: Quality, No Frills Workhorse.

Patton has introduced a high density FXS channel bank.

Pros
-Patton quality voip gateway. Config and forget.
-free Patton Smartnode configuration tool for popular PBX's: http://bit.ly/dNseKt
-solid cast 19" mounting brackets
-Patton support 1st rate.

Cons
-one power LED is all there is. No booting status, channel status leds.
-Std 50pin telco plug required to actually plug in analogue phones
-web interface is not very intuitive
-Getting Started manual is (p6) is unclear (innacurate?) how the gateway is to be configured

Patton tends to go light on the frills, gui and graphics. Our experience has been they are serious workhorses that rarely give trouble.



Watch first impression video review of the Patton Smartnode 4300 24port FXS channel bank below.

Patton Provides Free PSTN Gateway Configuration Tool for snom ONE & pbxnsip Phone System

If you are a regular reader of my blog you know that I am a fan of Patton gateways. But I've come to realize that it's not only me but the whole Windows PBX community seems to prefer Patton PSTN gateways over the alternatives by a pretty big margin according to my Feb 2010 survey.

Why? Rock solid quality and mind blowing level of support! I can't stress enough how good Patton support is. Just today, once again, I was struck by Patton's unusally proactive and astonishing support. I was talking to Daniel Lizaola at Patton support about the trouble new snom ONE administrators are having configuring gateways for snom ONE/pbxnsip because there is no built-in gateway "configurator". (otherwise an incredible pbx--one you should not miss!) Daniel said he can email over a free configurator developed by Patton for snom ONE!

This tool will also configure FXS ports on the Patton gateways for snom ONE. Unfortunately at this moment snom is limiting non-snom devices. (2 for free, 5 for yellow and 10 for blue) I would really like to see Patton's FXS unit as an "allowed & unlimited" device on snom ONE. If you would want to see this too I suggest you vote for this feature here.

So checkout this tool which will save you hours of "fiddling" and I'd be glad for feedback via comments.

Click Here to Download the free snom ONE, pbxnsip, 3CX and Generic Patton PSTN Gateway configurator.

Click Here to Read all my articles on Patton gateways for IP PBX's.

Kerry Garrison Shows How to Configure a Patton 4114 FXO

Another excellent training video by Kerry:

http://www.voipstore.com/configuring-a-patton-4114-fxo-gateway-with-3cx

Kerry Garrison Does a Great Video Showing You How to Configure a Patton 4960 with 3CX

Here is his blog article:
http://www.voipstore.com/configuring-a-patton-4960-pri-gateway-with-3cx/

How to Collect Debug Information from a Patton Smartnode Gateway (Patton 4114)

Quick Video On How to Collect Debug Info From Patton Smartnode:

Here is the info You Want to copy into Putty telnet session:

debug gateway sip transport detail 5
debug gateway sip error detail 5
debug call-control detail 5
debug call-router detail 5
debug ccfxo
debug fxo

To output the running config type:
show running-config